Views: 5 Author: Site Editor Publish Time: 2026-11-19 Origin: Site
Deep-sea aquaculture, trawling nets and suspended fishing systems require floats that can remain reliable under water pressure, repeated handling and long-term marine exposure. The float must provide the required buoyancy while also matching the rope, net, chain or connection arrangement used in the project.
ABS deep-sea floats are also known as depth spheres, trawl net floats or ABS fishing buoys. They are used in different marine and fishery applications, including deep-sea aquaculture, trawling nets, custom fishing nets and underwater mooring arrangements. However, choosing a suitable float is not simply a matter of selecting the largest diameter. Working depth, pressure resistance, buoyancy, connection design, installation direction and project conditions should all be reviewed before placing an order.
This guide explains the main factors to consider when selecting an ABS deep-sea float for aquaculture and trawling applications.
1. Understand the role of the float in the system
An ABS float may be used to provide buoyancy for a net, rope, connection or underwater mooring arrangement. In a deep-sea mooring system, it can act as a floater between rope and chain and help keep the connection away from the seabed, subject to the project design. Typical uses may include:
Deep-sea fish farms
Offshore aquaculture cages and nets
Trawling nets Custom fishing nets
Shellfish and seaweed suspended cultivation systems
Underwater mooring grids Vertical or horizontal rope arrangements
The required float arrangement depends on the complete system. A single float may be used for a small net section, while a larger project may use multiple buoys distributed along ropes, net lines or a mooring grid. Before choosing the product, identify what the float needs to support, where it will be installed and how it will be connected.
2. Confirm the required working depth
Working depth is one of the first specifications to check. Water pressure increases with depth, so the selected float must be suitable for the intended installation depth and pressure conditions. Our produced buoys can meet a working-depth range from 1 metre to 2,000 metres. The exact applicable depth depends on the selected series, size, construction and product configuration.
3. Check buoyancy and supported load
Buoyancy should be reviewed together with the weight and movement of the equipment supported by the float. Depending on the application, the float may support part of a rope, chain, net, connection fitting or mooring assembly. The required calculation may need to consider:
Float weight Rope or chain weight in water
Net or equipment weight
Connection hardware
Required reserve buoyancy
Number of floats in the arrangement
4. Select the correct connection design
The connection design should match the rope, net or mooring layout. The product page describes several ABS float configurations, including:
Center-hole series
Two-ears series
Double-headed ear series
Four-eyes series
Two-holes series
A center-hole float may be appropriate when a rope, line or connection passes through the central opening. An eye-based float may be more suitable when the line needs to connect externally through lifting or rope-hold points. The final choice depends on the load direction, line arrangement and installation method.
Check the following dimensions before ordering:
Float diameter
Hole diameter
Eye or connection size
Rope diameter
Shackle or connector dimensions
Waysail specializes in sustainable and environmentally marine and aquaculture solutions, based on many years of experience in the supply and installation of all types of mooring systems, from aquaculture farms to single boat moorings.