 |
| Quantity: | |
|---|---|
315MM Hydraulic Butt Fusion Welding Machine
Butt fusion welding is a method of joining pipes and fittings of the same width and thickness using pressure and heat. The mouth of the to be welded HDPE part is heated to 170-250 degrees in order to be smoothly smoothed. They will then be joined by touching each other. HDPE butt welding is performed by pressing down on specific areas of the heater, waiting under pressure, and combining them.To get a good HDPE butt welding, a good force and temperature are required.
This new generation of geomembrane welding, plastic welding equipment meet the needs for plastics industry continuously expanding the application in the modern social engineering. With an advanced hot-wedge, hot air structure to weld plastic for a variety of different material and thickness. It is available for welding of HDPE, PVDF, EVA, PP, etc. all can be hot-melt material.
| Model | Product Description and Specifications | |
| WS315A | Hydraulic Butt Welding | Max temperature: 270℃ |
| Applicable: PE, PP, PVDF | Heating plate surface temperature: | |
| size:110-125-140-160-180-200 | 170℃-250℃ | |
| -225-250-280-315 (mm) | Temperature deviation: ±5℃ | |
| Power supply: 220V 50Hz | Pressure adjusting: 0-6.3Mpa | |
| Overall Power: 5.85KW | heating plate: 3.1KW | |
| planing tool: 2.0KW(23A) | ||
| Hydraulic station: 0.75KW | ||
Welding Introduction For HDPE pipes:
1. Fix the clamps on the machine rack.
2. Place the HDPE pipes on the clamps and tighten the bolts.
3. Mill the end of the HDPE pipes with the facer.
4. Put the heater plate on the machine rack and heat the pipes within the proper time.
5. Remove the heater plate and connect the HDPE pipes.
Structure:
Details of Butt Fusion Welding Machine
Workshop of Butt Fusion Welding Machine
Certificate
Package & Delivery
